CLACK Motorized alterning valve 1.5 BSPT Revision 2

1.5” NPT or 1.5” BSPT Available

Epoxy coated lead free brass valve body*

Allows for two WS1.5 Valves to be a Twin Alternating System

Full 1.5” ports with minimal pressure loss

Provides for no raw water bypass during regeneration

Provides choices of treated or non-treated water regeneration

Proven and reliable Clack DC drive assembly

Low voltage drive assembly controlled by valve’s circuit board

Flow from Port A to Common has a 3.74 PSI drop at 60 GPM

Flow from Port B to Common has a 2.15 PSI drop at 60 GPM

Hydraulically Balanced Piston Valve

Patented Seal/Spacer Stack Assembly

Operating Pressures (min/max): 1,4 bar/ 8,6 bar

Operating Temperatures(min/max): 4C/43C